DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
To judge the malfunction, the diagnosis checks that the A/F signal computed by ECM from the A/F sensor 1 signal is not inordinately low.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0132 |
A/F SENSOR1 (B1) [Air fuel ratio (A/F) sensor 1 (bank 1) circuit high voltage] |
Diagnosis condition |
-- |
|
Signal (terminal) |
Air fuel ratio sensor 1 signal |
||
|
Threshold |
The A/F signal computed by ECM from the A/F sensor 1 signal is constantly approx. 5 V |
||
|
Diagnosis delay time |
-- |
||
|
P0152 |
A/F SENSOR1 (B2) [Air fuel ratio (A/F) sensor 1 (bank 2) circuit high voltage] |
Diagnosis condition |
-- |
|
Signal (terminal) |
Air fuel ratio sensor 1 signal |
||
|
Threshold |
The A/F signal computed by ECM from the A/F sensor 1 signal is constantly approx. 5 V |
||
|
Diagnosis delay time |
-- |
||