DTC Description: Fail-Safe
WARNING: This page is about a different variant/trim than selected.
|
DTC No. |
Detected items |
Engine operating condition in fail-safe mode |
|
|
P0117 P0118 |
Engine coolant temperature sensor 1 circuit |
Engine coolant temperature will be determined by ECM based on the following condition. CONSULT displays the engine coolant temperature decided by ECM. |
|
|
Condition |
Engine coolant temperature decided (CONSULT display) |
||
|
Just as ignition switch is turned ON or START |
40 deg.C (104 deg.F) |
||
|
Approx. 4 minutes or more after engine starting |
80 deg.C (176 deg.F) |
||
|
Except as shown above |
40 - 80 deg.C (104 - 176 deg.F) (Depends on the time) |
||
|
When the fail-safe system for engine coolant temperature sensor 1 is activated, the cooling fan operates while engine is running. |
|||