Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 minutes or more (to discharge backup capacitor).
Never use an unspecified tester or other measuring device.

CHECK HARNESS CONNECTOR
Check the harness connector for disconnection, looseness or damage.

Is the inspection result normal?

YES

GO TO 2.

NO

Damage: Replace malfunctioning harness and connector.

NO

Disconnection or looseness: Securely lock the connector.
CHECK WIRING HARNESS
Check the wiring harness externals.

Is the inspection result normal?

YES

GO TO 3.

NO

Replace malfunctioning harness and connector.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1. Replace air bag diagnosis sensor unit. Refer to Removal and Installation .
2. Perform DTC confirmation procedure. Refer to DTC Description .
Is DTC detected?

YES

GO TO 1.

NO

Inspection End.