LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Maintenance) >> Periodic Maintenance >> Engine Maintenance (VQ35DE) >> Drive Belts >> Checking Drive Belt

Checking Drive Belt

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Inspect and check the drive belt with the engine off.
  1. Visually check entire drive belt for wear, damage or cracks.
  2. Check that the drive belt auto-tensioner indicator is within the possible use range.
    NOTE:
    • When new drive belt is installed, the drive belt auto-tensioner indicator should be within the new drive belt range.
    • Check the drive belt auto-tensioner indicator when the engine is cold.
  3. If the drive belt auto-tensioner indicator is out of the possible use range or drive belt is damaged, replace drive belt.
scientia non olet · About LEMON Manuals