LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 5)) >> DTC/Circuit Diagnosis >> DTC P1556: Battery Temperature Sensor >> Component Inspection (Battery Temperature Sensor)

Component Inspection (Battery Temperature Sensor)

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BATTERY TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect battery current sensor.
    3. Check the resistance between battery current sensor connector terminals.

      Battery current sensor

      Resistance

      +

      -

      Terminal

      2

      3

      continuity with the resistance value 100 Ω or more

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace battery negative cable assembly.

scientia non olet · About LEMON Manuals