LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 5)) >> DTC/Circuit Diagnosis >> DTC P0605: ECM >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START 
    1. Turn ignition switch ON.
    2. Erase DTC.
    3. Perform DTC CONFIRMATION PROCEDURE.

      See DTC Description .

    Is the 1st trip DTC P0605 displayed again?

    YES

    Replace ECM. Refer to Removal and Installation .

    NO

    INSPECTION END