LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 5)) >> DTC/Circuit Diagnosis >> DTC P0520: EOP Sensor >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. A voltage signal transmitted from the engine oil pressure sensor is lower than 0.26 V.
  2. A voltage signal transmitted from the engine oil pressure sensor is higher than 4.9 V.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0520

EOP SENSOR/SWITCH

(Engine oil pressure sensor/switch circuit)

1

Diagnosis condition

Start engine and let it idle

Signal (terminal)

Voltage signal transmitted from engine oil pressure sensor to ECM

Threshold

A voltage signal transmitted from the engine oil pressure sensor is lower than 0.26 V

Diagnosis delay time

5 seconds or more

2

Diagnosis condition

Start engine and let it idle

Signal (terminal)

Voltage signal transmitted from engine oil pressure sensor to ECM

Threshold

A voltage signal transmitted from the engine oil pressure sensor is higher than 4.9 V

Diagnosis delay time

5 seconds or more