LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 5)) >> DTC/Circuit Diagnosis >> DTC P0520: EOP Sensor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK EOP SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect EOP sensor harness connector.
    3. Check resistance between EOP sensor connector terminals.

      EOP sensor

      Condition

      Resistance

      (kΩ)

      +

      -

      Terminal

      1

      2

      None

      4 - 10

      3

      2 - 8

      2

      1

      4 - 10

      3

      1 - 3

      3

      1

      2 - 8

      2

      1 - 3

    Is the inspection result normal?

    YES

    INSPECTION END.

    NO

    Replace EOP sensor. Refer to Component Parts Location .

scientia non olet · About LEMON Manuals