Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC PRIORITY
If DTC P0500 is displayed with DTC UXXXX or P0607, first perform the confirmation procedure for DTC UXXXX or P0607.

Is applicable DTC detected?

YES

Perform diagnosis of applicable.
- DTC UXXXX: Refer to DTC Index .
- DTC P0607: Refer to DTC Description .
NO

GO TO 2.
CHECK DTC WITH TCM
Check DTC with TCM. Refer to CONSULT Function .

Is the inspection result normal?

YES

GO TO 3.

NO

Perform trouble shooting relevant to DTC indicated.
CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Check DTC with ABS actuator and electric unit (control unit). Refer to CONSULT Function (without ICC), CONSULT Function (with ICC).

Is the inspection result normal?

YES

GO TO 4.

NO

Perform trouble shooting relevant to DTC indicated.
CHECK DTC WITH COMBINATION METER
Check DTC with combination meter. Refer to CONSULT Function (METER/M&A) .

Is the inspection result normal?

YES

GO TO 5.

NO

Perform trouble shooting relevant to DTC indicated.
CHECK OUTPUT SPEED SENSOR
Check output speed sensor. Refer to Diagnosis Procedure .

Is the inspection result normal?

YES

GO TO 6.

NO

Replace or replace error-detected parts.
CHECK WHEEL SENSOR
Check wheel sensor. Refer to Diagnosis Procedure , Diagnosis Procedure .

Is the inspection result normal?

YES

INSPECTION END

NO

Replace or replace error-detected parts.