LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Control System (DTC/Circuit Diagnosis) (3 Of 5)) >> DTC/Circuit Diagnosis >> DTC P0460: Fuel Level Sensor >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

When the vehicle is parked, the fuel level in the fuel tank is naturally stable. It means that output signal of the fuel level sensor does not change. If ECM senses sloshing signal from the sensor, fuel level sensor malfunction is detected.

Even though the vehicle is parked, a signal being varied is sent from the fuel level sensor to ECM.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0460

FUEL LEV SEN SLOSH

(Fuel level sensor "A" circuit)

Diagnosis condition

Start engine and let it idle

Signal (terminal)

Voltage signal transmitted from Fuel level sensor to ECM

Threshold

Even though the vehicle is parked, a signal being varied is sent from the fuel level sensor to ECM

Diagnosis delay time

-
scientia non olet · About LEMON Manuals