Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUEL TANK TEMPERATURE SENSOR
- Turn ignition switch OFF.
- Remove fuel level sensor unit. Refer to Removal and Installation .
- Check resistance between "fuel level sensor unit and fuel pump" terminals by heating with hot water as shown in the figure below.
Mass air flow sensor
Condition
Resistance (kΩ)
+
-
Terminals
3
1
Temperature [°C (°F)]
20 (68)
2.3 - 2.7 kΩ
50 (122)
0.79 - 0.90 kΩ
Is the inspection result normal?
YES
INSPECTION END
NO
Replace fuel level sensor unit and fuel pump. Refer to Removal and Installation .