DTC Description: Fail-Safe
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
|
Engine operating condition in fail-safe mode |
|||
|
Fail safe mode |
Vehicle behavior |
||
|
Engine coolant temperature sensor circuit |
Engine coolant temperature will be determined by ECM based on the following condition. CONSULT displays the engine coolant temperature decided by ECM. |
||
|
Condition |
Engine coolant temperature decided (CONSULT display) |
||
|
Just as ignition switch is turned ON or START |
40°C (104°F) |
||
|
Approx 4 minutes or more after engine starting |
80°C (176°F) |
||
|
Except as shown above |
40 - 80°C (104 - 176°F) (Depends on the time) |
||
|
When the fail-safe system for engine coolant temperature sensor is activated, the cooling fan operates while engine is running. |
|||