LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Control System (DTC/Circuit Diagnosis) (2 Of 5)) >> DTC/Circuit Diagnosis >> DTC P0108: Barometric Pressure Sensor >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CONFIRMATION 
    1. Turn ignition switch ON.
    2. Erase DTC.
    3. Perform DTC confirmation procedure. Refer to DTC Description .
    4. Check the DTC.

    Is the DTC displayed again?

    YES

    Replace ECM. Refer to Removal and Installation .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals