Component Inspection (Condenser-1)
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONDENSER-1
- Turn ignition switch OFF.
- Disconnect condenser-1 harness connector.
- Check resistance between condenser-1 terminals as per the following.
|
Terminals
|
Resistance
|
|
1 and 2
|
Above 1 MΩ [at 25C° (77C°)]
|
Is the inspection result normal?
YES
INSPECTION END
NO
Replace condenser-1.