Component Inspection(Fuel Pump)
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUEL PUMP
- Turn ignition switch OFF.
- Disconnect "fuel level sensor unit and fuel pump" harness connector.
- Check resistance between "fuel level sensor unit and fuel pump" terminals as follows.
Terminals
Resistance (Ω)
4 and 6
0.2 - 5.0 [at 25°C (77°F)]
Is the inspection result normal?
YES
INSPECTION END
NO
Replace "fuel filter and fuel pump assembly". Refer to Removal and Installation .