Component Inspection (Stop Lamp Relay)

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK STOP LAMP RELAY

Turn ignition switch OFF.
Remove stop lamp relay.

Check the continuity between stop lamp relay terminals as per the following conditions.

Courtesy of NISSAN NORTH AMERICA, INC.

Stop lamp relay		Condition	Continuity
+	-
Terminal
3	5	12 V direct current supply between terminals 1 and 2	Existed
		No current supply	Not existed

Is the inspection result normal?

YES

INSPECTION END

Replace stop lamp relay.