DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- An excessively high voltage signal from the ICC steering switch is sent to ECM.
- ECM detects that input signal from the ICC steering switch is out of the specified range.
- ECM detects that the ICC steering switch is stuck ON.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P1564 |
ASCD SW (ICC steering switch) |
1 |
Diagnosis condition |
- |
|
Signal (terminal) |
ICC steering switch signal |
|||
|
Threshold |
An excessively high voltage signal from the ICC steering switch is sent to ECM |
|||
|
Diagnosis delay time |
- |
|||
|
2 |
Diagnosis condition |
- |
||
|
Signal (terminal) |
ICC steering switch signal |
|||
|
Threshold |
ECM detects that input signal from the ICC steering switch is out of the specified range |
|||
|
Diagnosis delay time |
- |
|||
|
3 |
Diagnosis condition |
- |
||
|
Signal (terminal) |
ICC steering switch signal |
|||
|
Threshold |
ECM detects that the ICC steering switch is stuck ON |
|||
|
Diagnosis delay time |
- |
|||