Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ICC STEERING SWITCH
- Turn ignition switch OFF.
- Disconnect combination switch (spiral cable) harness connector M149.
- Check resistance between combination switch harness connector terminals under the following conditions.
Combination switch
Condition
Resistance (Ω)
Connector
Terminals
M149
15 and 18
MAIN switch: Pressed
Approx. 0
CANCEL switch: Pressed
Approx. 310
DISTANCE switch: Pressed
Approx. 740
SET/- switch: Pressed
Approx. 1, 410
RES/+ switch: Pressed
Approx. 2, 590
All ICC steering switches: Released
Approx. 5, 460
Is the inspection result normal?
YES
INSPECTION END
NO
Replace ICC steering switch. Refer to Removal and Installation .