DTC Detection Logic
An improper voltage is sent to the ECM through exhaust valve timing control solenoid valve.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0078 |
EX V/T ACT/CIRC-B1 [Exhaust valve timing control solenoid valve (bank 1) circuit] |
Diagnosis condition |
Start engine and let it idle |
|
Signal (terminal) |
Voltage signal transmitted from exhaust valve timing control solenoid valve to ECM |
||
|
Threshold |
An improper voltage is sent to the ECM through exhaust valve timing control solenoid valve |
||
|
Diagnosis delay time |
- |
||
|
P0084 |
EX V/T ACT/CIRC-B2 [Exhaust valve timing control solenoid valve (bank 2) circuit] |
Diagnosis condition |
Start engine and let it idle |
|
Signal (terminal) |
Voltage signal transmitted from exhaust valve timing control solenoid valve to ECM |
||
|
Threshold |
An improper voltage is sent to the ECM through exhaust valve timing control solenoid valve |
||
|
Diagnosis delay time |
- |
||