Battery Disconnect: Installation

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION: Replace the fusible link box (battery) if it has been dropped or sustained an impact.

To install the battery, carefully read the following instructions:

To prevent damage to the parts, connect the battery cable to the positive terminal first.
After connecting battery cables, to securely supply battery voltage, ensure battery cables are tightly clamped to battery terminals for good contact.
To securely supply battery voltage, check battery terminal for poor connection caused by corrosion.

Battery positive terminal nut	: 5.0 N.m (0.5 kg-m, 44 in-lb)
Battery negative terminal nut	: 5.4 N.m (0.55 kg-m, 48 in-lb)

Reset electronic systems as necessary. Refer to Special Repair Requirement .