LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Power Window Control System) >> Symptom Diagnosis >> Auto Operation Does Not Operate But Manual Operate Normally >> Driver Side >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM INITIALIZATION PROCEDURE 

    Perform initialization procedure and confirm operation.

    Refer to Work Procedure .

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    GO TO 2 .

  2. CHECK ENCODER (DRIVER SIDE) CIRCUIT 

    Check encoder (driver side) circuit.

    Refer to Component Function Check .

    Is the inspection result normal?

    YES

    GO TO 3 .

    NO

    Repair or replace the malfunctioning parts.

  3. CONFIRM THE OPERATION 

    Confirm the operation again.

    Is the inspection result normal?

    YES

    Check intermittent incident. Refer to Intermittent Incident .

    NO

    GO TO 1 .

scientia non olet · About LEMON Manuals