Removal and Installation: Installation
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- Connect the quick connector as follows:
 Courtesy of NISSAN NORTH AMERICA, INC.
|
- Check the connection for damage or any foreign materials.
- Align the connector with the tube, then insert the connector straight into the tube until a click is heard.
- After the tube is connected, make sure the connection is secure by performing the following checks:
- Pull the tube and the connector to make sure they are securely connected.
- Visually confirm that the two retainer tabs (3) are connected to the quick connector (2).
 Courtesy of NISSAN NORTH AMERICA, INC.
|
(1): Resin tube
(4): Retainer
(A): Connection (cross-section)
(B): Disconnection
(C): To under floor fuel line
(D): To fuel tank
Fuel Filler Hose
- Insert fuel filler hose to the length below:
- Be sure hose clamp is not placed on swollen area of fuel filler tube.
- Tighten the clamp hand with the top mark (A) until the mark is on the bolt head flange.
 Courtesy of NISSAN NORTH AMERICA, INC.
|