LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Fuel System) >> Removal And Installation >> EVAP Canister >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel tank. Refer to Removal and Installation .
  2. Disconnect EVAP hose from EVAP canister.
  3. Disconnect EVAP control system pressure sensor (with O-ring).
  4. Disconnect EVAP canister vent control valve and hose.
    CAUTION: Do not reuse the O-ring.
  5. Disconnect main EVAP hose from EVAP canister.
  6. Remove EVAP canister bolt and EVAP canister.
scientia non olet · About LEMON Manuals