LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Power Control System (IPDM E/R) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2098: Ignition Relay On Stuck >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Turn ignition switch OFF and wait 1 second or more.
    3. Check DTC in "Self Diagnostic Result" mode of "IPDM E/R".

    Is DTC detected?

    YES

    Refer to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: Inspection End.

scientia non olet · About LEMON Manuals