Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SEAT BELT BUCKLE SWITCH LH
- Turn ignition switch OFF.
- Disconnect the seat belt buckle switch LH connector.
- Check continuity between the seat belt buckle switch LH terminals 1 and 2.
Condition
Terminals
Continuity
When seat belt buckle LH is fastened
1- 2
No
When seat belt buckle LH is unfastened
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Replace the seat belt buckle switch LH. Refer to Removal and Installation .