Fitting Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After door glass installation is complete:
- Perform the System Initialization. Refer to Description .
- Check the Anti-Pinch function. Refer to Description .
- Check that the door glass is securely fit into the door glass rubber run groove.
- Lower the door glass slightly [approximately 10 to 20 mm (0.4 to 0.8 in)] and check that the clearance to the door glass rubber run is parallel. If the clearance between the glass and door glass rubber run is not parallel, loosen the regulator bolts and glass to regulator bolts to correct the glass position.