LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Engine Control System (DTC/Circuit Diagnosis) (15 Of 17)) >> DTC/Circuit Diagnosis >> DTC P2614: Intake Camshaft Position Sensor >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P2614

A camshaft posi signal B1

("A" camshaft position signal output circuit/open bank 1)

Diagnosis condition

Engine running at idle

Signal (terminal)

Intake camshaft position sensor (bank 1) signal for electric intake valve timing control

Threshold
  • The signal voltage of intake camshaft position sensor is less than 1.0 V
  • The signal voltage of intake camshaft position sensor is more than 5.8 V

Diagnosis delay time

1 second
scientia non olet · About LEMON Manuals