LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 680 (Exterior Lighting System (Circuit Diagnosis)) >> Circuit Diagnosis >> Hazard Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT 

    SYMBOL CONSULT

    1. Turn the ignition switch ON.
    2. Select HAZARD SW of BCM (FLASHER) DATA MONITOR item.
    3. While operating the hazard switch, check the monitor status.

    Monitor item

    Condition

    Monitor status

    HAZARD SW

    Hazard switch

    ON

    On

    OFF

    Off

    Is the inspection result normal?

    YES

    Hazard switch circuit is normal.

    NO

    Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals