LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 679 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ENGINE START FUNCTION 
    1. Check that there are no DTC's except for DTC P1610 detected.

      If detected, erase the DTC after fixing.

    2. Turn ignition switch OFF.
    3. Contact the registered Intelligent Key backside to push-button ignition switch and wait 5 seconds.
    4. Turn ignition switch ON.
    5. Turn ignition switch OFF and wait 5 seconds.
    6. Repeat steps 3 and 5 twice (a total of 3 times).
    7. Check that engine can start.

    Inspection End.

scientia non olet · About LEMON Manuals