LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 679 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2605: Shift Position >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Shift the selector lever to the P (Park) position.
    2. Turn ignition switch ON and wait 1 second or more.
    3. Shift the selector lever to the N (Neutral) position and wait 1 second or more.
    4. Shift the selector lever to any position other than P (Park) and N (Neutral) and wait 1 second or more.
    5. Check DTC in "Self-Diagnostic Result" mode of "BCM" using CONSULT.

    Is DTC detected?

    YES

    Go to Diagnosis Procedure .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals