Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CVT SHIFT SELECTOR (PARK POSITION SWITCH)
- Turn ignition switch OFF.
- Disconnect CVT shift selector connector.
- Check continuity between CVT shift selector (park position switch) terminals.
CVT shift selector (park position switch)
Condition
Continuity
Terminal
5
6
Selector lever
P (Park) position
No
Other than above
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Replace CVT shift selector. Refer to Removal and Installation (RE0F10J).