Component Inspection

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PUSH-BUTTON IGNITION SWITCH

Turn ignition switch OFF.
Disconnect push-button ignition switch connector.

Check continuity between push-button ignition switch terminals.

Push-button ignition switch		Condition		Continuity
Terminal
4	8	Push-button ignition switch	Pressed	Yes
			Not pressed	No

Is the inspection result normal?

YES

Inspection End.

Replace push-button ignition switch. Refer to Removal and Installation .