Diagnosis Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM SELF DIAGNOSTIC RESULT
Perform "Self Diagnostic Result" of "IPDM E/R" using CONSULT.

Is display history of DTC B210D CRNT?

YES

GO TO 2.

NO

Refer to Intermittent Incident .

CHECK STARTER CONTROL RELAY CONTROL CIRCUITS VOLTAGE

Check voltage between IPDM E/R connectors and ground.

IPDM E/R

Ground

Voltage

(Approx.)

Connector

Terminal

E119

Battery voltage

Is the inspection result normal?

YES

Replace IPDM E/R. Refer to Removal and Installation .

GO TO 3.

CHECK STARTER CONTROL RELAY CONTROL CIRCUIT CONTINUITY

Disconnect IPDM E/R connectors E119 and BCM connector M19.

Check continuity between IPDM E/R connector E119 and ground.

IPDM E/R		Ground	Continuity
Connector	Terminal
E119	33	--	No

Is the inspection result normal?

YES

Refer to Diagnosis Procedure .

Repair or replace harness or connectors.