Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK AWD SOLENOID
- Turn the ignition switch OFF.
- Disconnect AWD solenoid harness connector.
- Check the resistance between AWD solenoid harness connector terminals.
AWD solenoid
Resistance (Approx.)
Terminal
1
2
2.45 Ohm
Is the inspection result normal?
YES
Inspection End
NO
AWD solenoid is malfunctioning. Replace electric controlled coupling. Refer to Removal and Installation .