Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK BATTERY SAVER OUTPUT/POWER SUPPLY FUNCTION
CONSULT
- Turn ignition switch ON.
- Turn each interior room lamp ON:
- Front room/map lamp assembly
- Vanity lamps
- Personal lamps 2nd row
- Cargo lamp
- Open the driver door to turn ON the following lamps:
- Front step lamps
- Foot lamps
- Front outside handle assembly lamps
- Open the back door lock assembly (door ajar switch) to turn ON the following lamp:
- Automatic back door close switch
- Select BATTERY SAVER of BCM (BATTERY SAVER) active test item.
- While operating the test item, check that each interior room lamp turns ON/OFF.
ON
: Interior room lamp OFF
OFF
: Interior room lamp ON
Is the inspection result normal?
YES
Battery saver output/power supply circuit is normal.
NO
Refer to Diagnosis Procedure .