Automatic Drive Positioner (DTC/Circuit Diagnosis)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ADP STEERING SWITCH (TILT & TELESCOPIC SWITCH) GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect ADP steering switch (tilt & telescopic switch).
- Check continuity between ADP steering switch (tilt & telescopic switch) and ground.
ADP steering switch (tilt & telescopic switch)
Ground
Continuity
Connector
Terminal
M16
3
Yes
Is the inspection result normal?
YES
Check intermittent incident. Refer to Intermittent Incident .
NO
Repair or replace harness.