Component Inspection
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK TELESCOPIC SWITCH
- Turn ignition switch OFF.
- Disconnect ADP steering switch (telescopic switch).
- Check continuity between ADP steering switch terminals.
ADP steering switch (telescopic switch)
Condition
Continuity
Terminal
3
1
Telescopic switch (forward)
Operate
Yes
Release
No
6
Telescopic switch (backward)
Operate
Yes
Release
No
Is the inspection result normal?
YES
Inspection End.
NO
Replace ADP steering switch (telescopic switch). Refer to Removal and Installation .