Component Function Check

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "MIR/SEN RH U-D", "MIR/SEN RH R-L" in "DATA MONITOR" mode with CONSULT.

Check the mirror sensor RH signal under the following conditions.

Monitor item	Condition		Value
MIR/SEN RH U-D	Door mirror RH	Close to peak	3.4 V
MIR/SEN RH U-D		Close to valley	0.6 V
MIR/SEN RH R-L		Close to right edge	0.6 V
MIR/SEN RH R-L		Close to left edge	3.4 V

Is the inspection result normal?

YES

Inspection End.

Perform diagnosis procedure. Refer to Diagnosis Procedure .