Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "DATA MONITOR" mode with CONSULT.
- Check mirror sensor (driver side) signal under the following condition.
Monitor item
Condition
Value
MIR/SEN LH U-D
Door mirror LH
Close to peak
3.4 V
Close to valley
0.6 V
MIR/SEN LH R-L
Close to right edge
3.4 V
Close to left edge
0.6 V
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .