Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "LIFT FR SW-UP", "LIFT FR SW-DN" in "DATA MONITOR" mode with CONSULT.
- Check lifting switch (front) signal under the following conditions.
Monitor item
Condition
Status
LIFT FR SW-UP
Lifting switch front (upward)
Operate
ON
Release
OFF
LIFT FR SW-DN
Lifting switch front (downward)
Operate
ON
Release
OFF
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .