Component Function Check
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "MIR CON SW-UP", "MIR CON SW-DN", "MIR CON SW-RH", "MIR CON SW-LH" in "DATA MONITOR" mode with CONSULT.
- Check mirror switch signal under the following conditions.
Monitor item
Condition
Status
MIR CON SW-UP
Mirror switch (up)
Operate
ON
Release
OFF
MIR CON SW-DN
Mirror switch (down)
Operate
ON
Release
OFF
MIR CON SW-RH
Mirror switch (right)
Operate
ON
Release
OFF
MIR CON SW-LH
Mirror switch (left)
Operate
ON
Release
OFF
Is the inspection result normal?
YES
Inspection End.
NO
Perform diagnosis procedure. Refer to Diagnosis Procedure .