LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Automatic Drive Positioner (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Door Mirror Motor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DOOR MIRROR MOTOR-I 

    Check that door mirror motor does not trap foreign objects and does not have any damage.

    Refer to Exploded View .

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Replace door mirror actuator. Refer to Removal and Installation .

  2. CHECK DOOR MIRROR MOTOR-II 
    1. Turn ignition switch OFF.
    2. Disconnect door mirror.
    3. Apply 12 V to each power supply terminal of door mirror motor.

      Door mirror connector

      Terminal

      Operational direction

      (+)

      (-)

      D6 (LH)

      D116 (RH)

      (with around view monitor)

      10

      11

      RIGHT

      11

      10

      LEFT

      12

      10

      UP

      10

      12

      DOWN

      D4 (LH)

      D107 (RH)

      (without around view monitor)

      10

      9

      RIGHT

      9

      10

      LEFT

      8

      10

      UP

      10

      8

      DOWN

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace door mirror actuator. Refer to Removal and Installation .