Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Disconnect combination meter harness connector M24 and washer fluid level switch harness connector E208.
- Check continuity between combination meter harness connector M24 and washer fluid level switch harness connector E208.
Combination meter
Washer fluid level switch
Continuity
Connector
Terminal
Connector
Terminal
M24
24
E208
1
Yes
- Check continuity between combination meter harness connector M24 and ground.
Combination meter
Ground
Continuity
Connector
Terminal
M24
24
No
Is the inspection result normal?
YES
GO TO 2
NO
Repair or replace harness or connector.
- CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT
Check continuity between washer fluid level switch harness connector E208 and ground.
Washer fluid level switch
Ground
Continuity
Connector
Terminal
E208
2
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Repair or replace harness or connector.