Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK STEERING SWITCH CIRCUIT

Turn ignition switch OFF.
Disconnect combination meter harness connector M24 and spiral cable harness connector M30.

Check continuity between combination meter harness connector M24 and spiral cable harness connector M30.

Combination meter		Spiral cable		Continuity
Connector	Terminal	Connector	Terminal
M24	21	M30	11	Yes
	22		9
	23		8

Check continuity between combination meter harness connector M24 and ground.

Combination meter		Ground	Continuity
Connector	Terminal
M24	21		No
	22
	23

Is the inspection result normal?

YES

Inspection End.

Repair or replace harness or connector.