Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK METER CONTROL SWITCH
- Turn ignition switch OFF.
- Disconnect meter control switch harness connector.
- Check meter control switch.
Meter control switch
Condition
Continuity
Terminals
7
4
When illumination control switch (-) is pressed
Yes
Other than the above
No
5
When trip reset switch is pressed
Yes
Other than the above
No
6
When illumination control switch (+) is pressed
Yes
Other than the above
No
Is the inspection result normal?
YES
Inspection End.
NO
Replace meter control switch. Refer to Removal and Installation .