LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM SELF-DIAGNOSIS 

    SYMBOL CONSULT

    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "METER/M&A".
    3. Check DTC.

    Is DTC detected?

    YES

    Refer to Diagnosis Procedure .

    NO

    Refer to Intermittent Incident .