Wiper & Washer System (Circuit Diagnosis)
WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FRONT WIPER MOTOR GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect front wiper motor connector.
- Check continuity between front wiper motor harness connector and ground.
Front wiper motor
Ground
Continuity
Connector
Terminal
E23
2
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Repair or replace harness.