Diagnosis Procedure
Vehicle does not enter 4-wheel drive mode even though AWD warning icon/display is not displayed.
- CHECK AWD WARNING ICON/DISPLAY
Perform the trouble diagnosis of the AWD warning icon/display. Refer to Diagnosis Procedure .
Is the inspection result normal?
YES
GO TO 2.
NO
Repair or replace the error-detected parts.
- CHECK PARKING BRAKE SWITCH SIGNAL
With CONSULT
Check "P BRAKE SW" of CONSULT "DATA MONITOR" for "ALL MODE AWD/4WD".
Monitor Item
Condition
Status
P BRAKE SW
When the parking brake pedal is operation.
On
When the parking brake pedal is not operation.
Off
Is the inspection result normal?
YES
GO TO 3.
NO
Proceed to Diagnosis Procedure (Type 1) or Diagnosis Procedure (Type 2).
- CRUISE TEST
Drive the vehicle for a period of time.
Does any symptom occur?
YES
Replace electric controlled coupling for mechanical malfunction (mechanical engagement of clutch is not possible). Refer to Removal and Installation .
NO
Check each harness connector pin terminal for disconnection.