Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CHECK MULTIFUNCTION SWITCH POWER AND GROUND
Check the multifunction switch power and ground circuits. Refer to Diagnosis Procedure .

Is the inspection result normal?

YES

GO TO 2 .

NO

Repair or replace harness or connectors.

CHECK MULTIFUNCTION SWITCH AV COMMUNICATION CIRCUITS

Turn ignition switch OFF.
Disconnect AV control unit connector M161, data link connector, combination meter connector M23 and multifunction switch connector.

Check continuity between AV control unit connector M161 and multifunction switch connector M259.

AV control unit		Multifunction switch		Continuity
Connector	Terminal	Connector	Terminal
M161	23	M259	4	Yes
	24		3

Check continuity between AV control unit connector M161 and ground.

AV control unit		Ground	Continuity
Connector	Terminal
M161	23	-	No
	24

Is the inspection result normal?

YES

Replace multifunction switch. Refer to Removal and Installation .

Repair or replace harness or connectors.