On Board Diagnosis Item

WARNING: This page is about a different car, the 2020 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

The on board diagnostic system has the following functions.

Diagnostic test mode	Function
Bulb check	MIL can be checked.
SRT status	ECM can read if SRT codes are set.
Malfunction warning	If ECM detects a malfunction, it illuminates or blinks MIL to inform the driver that a malfunction has been detected.
Accelerator pedal released position learning	ECM can learn the accelerator pedal released position. Refer to Description .
Throttle valve closed position learning	ECM can learn the throttle valve closed position. Refer to Description .
Electric intake valve timing control learning	The initial position of the electric intake valve timing control actuator can be adjusted. Refer to Description .